Rancang Bangun Monitoring Dan Identifikasi Pengguna Sepeda Motor Antisipasi Pencurian Berbasis Internet Of Things (Iot) Menggunakan Arduino
Keywords:
Arduino uno r3, NodeMCU 8266, vibration sensor, voltage sensor, neo6m GPS sensor, RFID sensor, relayAbstract
Radio-Frequency Identification (RFID) based technology as a motorbike security system. Apart from that, multi-layered security measures are implemented by utilizing the Global Positioning System (GPS) and microcontroller to provide information about the motorbike's position in real-time. Furthermore, this research involves designing an Internet of Things (IoT) based security system using the NodeMCU wifi module as the main processor. This system can trigger relays to carry out motorbike safety commands, such as turning off the engine, and provide early warnings via a smartphone application. Previous research was also involved in developing an IoT-based security system using RFID sensors, voltage sensors and vibration sensors. This research tries to improve the accuracy and effectiveness of the system by involving the latest technology. Based on this background, researchers propose the design of a multi-layered security system that is able to identify motorbike users. This research is entitled "Design of Monitoring and Identification of Motorcycle Users to Anticipate Theft Based on Internet of Things (IoT) Using Microcontrollers." The research results show that this system can detect ground height, air
References
“81-Article Text-448-1-10-20201030.pdf.”
Anna, “Bab I ْ ُ با حض خ ِ ي,” Galang Tanjung, no. 2504, pp. 1–9, 2011.
Aswardi, R. Mukhaiyar, Elfizon, and Nellitawati, “Pengembangan Trainer Programable Logic Gontroller Sebagai Media Pembelajaran,” J. Manaj. Pendidik., vol. 5, no. 1, pp. 51–56, 2019.
A. Boy et al., “Implementasi nodemcu esp8266 dalam rancang bangun sistem keamanan sepeda motor berbasis iot,” vol. 4, no. 2, pp. 163–170, 2021.
B. Broto Aji and M. Kristian Kelviandy, “Pemanfaatan RFID dalam Sistem Keamanan Motor Berbasis Arduino (Radio Frequency Identification),” J. Pendidik. Tambusai, vol. Volume 7 N, pp. 3758–3768, 2023.
D. S. Febby Amelia, “Sistem Informasi Tracking Pengurusan Ktp Berbasis Web Pada Uptd Disdukcapil Kecamatan Marpoyan,” J. Intra Tech, vol. 4, no. 2, pp. 60–68, 2020, doi: 10.37030/jit.v4i2.81.
S. P. Gultom, P. Pangaribuan, and B. A. Pramudita, “Sistem Kontrol Penguraian Asap Rokok Pada Ruangan Tertutup Menggunakan Metode PID,” e-Proceeding Eng., vol. 8, no. 5, pp. 4528–4537, 2021.
H. Hilal Indra Ramadhan, “The RANCANG BANGUN ALAT PENGAMAN SEPEDA MOTOR MENGGUNAKAN GPS BERBASIS IOT,” J. JEETech, vol. 1, no. 2, pp. 14–24, 2020, doi: 10.48056/jeetech.v1i2.8.
F. Husniyah, M. Ulum, K. Aji Wibisono, and R. Alfita, “Rancang Bangun Sistem Pengaman Pintu Menggunakan RFID dan Fingerprint,” J. FORTECH, vol. 2, no. 1, pp. 1–8, 2021, doi: 10.32492/fortech.v2i1.232.
Y. Ikhwani, “Analisis Dan Rancangan Sistem E-Voting Pemilihan Ketua Osis,” Technol. J. Ilm., vol. 9, no. 3, p. 138, 2018, doi: 10.31602/tji.v9i3.1382.
K. Kamarudin, M. Ridwan, J. Saputra, and K. M. Aby, “Sistem Pengukuran Arus dan Tegangan pada Rangkaian Kombinasi Virtual Lab,” J. Integr., vol. 14, no. 2, pp. 103–109, 2022, doi: 10.30871/ji.v14i2.4384.
A. Kurniawan, A. Narendro, R. A. Firdaus, and T. Wisjhnuadji, “Sistem Deteksi Lokasi Gempa Menggunakan Arduino Mega 2560, Sensor SW-420, GPS Dan Notifikasi SMS,” J. BIT (Budi Luhur Inf. Teknol., vol. 17, no. 1, pp. 62–68, 2020, [Online]. Available: https://journal.budiluhur.ac.id/index.php/bit/article/view/1016
M. Martono, “Implementasi Prototype Aplikasi Pengelolaan Inventaris Barang,” J. Ilm. Media Sisfo, vol. 13, no. 1, pp. 38–47, 2019, doi: 10.33998/mediasisfo.2019.13.1.566.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Journal of Computer Scine and Information Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
JCSITech has launched a new template since Vol. 11, No. 2 (2025).
